| 质量好的高速护坡模具需要有非常好的耐磨性和强韧性,同时必须要具备的就是高温和耐冷热疲劳的性能,这是因为高速护坡模具在生产的过程中会经历750度左右的高温,同时还要经过回火,所以模具的耐温性能是非常好的。此外,模具还要有可锻性、退火工艺性、切削加工性、氧化和淬硬性等一系列性能和大家比较注重的经济适用性。
Good quality highway slope protection mold need to have very good abrasion resistance and toughness, and at the same time must have is high temperature and resistant to cold and hot fatigue performance, this is because the highway slope protection in the process of production mold after the high temperature of 750 degrees or so, after tempering, even at the same time so the mold temperature resistant performance is very good. In addition, the mould also has the ability to forge, annealing, cutting processing, oxidation and hardenability, etc., and the economic applicability that is more attention to.
高速护坡模具在生产水泥预制护坡砖时常出现磨损、变形、冬天易碎等情况。磨损主要是在生产护坡砖时不注意日常保养造成的。变形是因为高速护坡模具原材料有有很好的柔韧性,在生产或库存堆积时压力过大从而导致。易碎的情况主要发生在冬天,而冬天大部分护坡砖厂家都会停止生产,所以这种情况非常少见。由于我国科技发展迅速,高速护坡模具技术也在不断的发展,应该说目前是中国塑料模具行业的大发展、大变革的时代.在这种形势下,作为模具生产的厂家应该认识局势的掌控方向,对塑料模具行业所受到的影响和未来的发展态势进行详细的剖析,从而使模具的未来能够更好的发展!
The high speed protecting slope mould is used in the production of the concrete precast protection grade brick, which often wear, deformation, and winter fragile. Wear is mainly in the production of the slope brick not to pay attention to the daily maintenance cause. The deformation is due to the good flexibility of the raw material of the high speed protection, which is caused by excessive pressure during production or inventory build-up. Fragile situations occur mainly in the winter, and most of the masonry homes in the winter stop production, so this is a rare occurrence. Due to rapid development of science and technology in our country, highway slope protection mould technology is also in constant development, it should be said that at present, is the great development of China plastic mould industry, the era of big bang. In this situation, as a way of making mould manufacturer should know the situation of control direction, the impact of plastic mold industry and future development situation carries on the detailed analysis, so that the mould can better future! |