盖板模具采用pp的材质,具有很好的韧性,可溶性和可塑性, 塑料颗粒高温下化成液态,是液体流入特定好的铁模具中,利用液态水循环使其冷却,塑料就根据铁模具的规格而塑型,可根据每个客户的图纸特定的,从而产生模具各种尺寸.盖板模具成型后,加入一定配比的水泥,24小时左右托模,成品跟模具的尺寸规格一样.简单便捷.近年来,我国的经济不断发展,很多地方都在修建公路,马路,这样所用到的盖板模具量就比较大,我们每天在路上行驶总会看到道路两边的路沿石,各型各样的,路沿石是利用模具制造出来的,就因为这样路沿石模具在工程建设上就起到很大的作用.在传统的路沿石制造中,采用的都是钢模具比较多,钢模具的特点是成本高,加工时间长,生产效率低.而路沿石模具的特点刚好弥补了钢模具成本高,加工时间长,生产效率低等在传统的路沿石制造中,采用的都是钢模具比较多,钢模具的特点是成本高,加工时间长,生产效率低.而盖板模具的特点刚好弥补了钢模具成本高,加工时间长,生产效率低等.

Mold using PP material, good toughness, soluble and plasticity, plastic particles under high temperature into the liquid is liquid into the iron mold specific good, the use of liquid water circulation cooling, plastic mold and plastic iron according to specifications, according to each customer's specific drawings, resulting in die mold molding of various sizes. After adding a certain proportion of the cement, 24 hour supporting die size specifications of products to the die. Simple and convenient. In recent years, the rapid development of China's economy, a lot of places in the construction of the road, the road, so the amount of mold used is relatively large, we every day on the road will see the road on both sides of the road along the stone, various kinds of stone, along the road through the mould manufacturing, because of this road along the stone mold in the engineering construction will play a significant role. In the traditional way Along the stone manufacturing, are used in steel mold more characteristic of steel mold is high cost, long processing time, low production efficiency and curb characteristics of die steel die just to make up the high cost, long processing time, low production efficiency in the traditional road along the stone manufacturing, using the is a steel mold more characteristic of steel mold is high cost, long processing time, the production efficiency is low. And the characteristics of mold to just make the steel die of high cost, long processing time, low production efficiency.