盖板模具是所制作的水泥制品是各类工程施工和建设当中必不可少的一种塑料模具,使用盖板模具可以极大的提高工程进度及工程质量.但是还有一些我们必须注意的事项,以下是一些需要注意的. 蒸汽: 因为蒸汽温度过高,塑料盖板模具在受到高温很容易变形,导致水泥制品不能规整成型和模具报废的严重后果. 振动棒: 使用振动棒作为压实水泥的工具会对模具造成很大的伤害,因为振动棒是从中心往外震动,力是从中心往四周扩展,导致模具外壁鼓包,水泥制品成型后不能完整的脱出模具甚至不能脱出模具. 硬物划伤: 模具在水泥制品脱模后内面容易粘上风干的水泥,切记不能用硬物直接刮盖板模具内壁,会刮伤内光面留下疤痕,在次生产时导致水泥成品跟着留下疤痕影响光面度和美观效果.

Mold is made of cement products is a kind of plastic mold is essential among all kinds of engineering construction and construction, improve the project progress and project quality mold can greatly. But there are some we must pay attention to matters needing attention. The following are some steam: because the steam temperature is too high, it is easy to mold plastic deformation under high temperature, resulting in serious consequences, not regular cement product molding and mold scrap. Vibration rod: vibration rod as a tool of compacted cement will cause great damage to the mold, because the vibration rod is vibration from the center to the outside force is extended from the center to the outer wall of the mold around, resulting bulge, extrusion mould cannot cement after complete molding mold. Not even from scratch hard objects: dry mold in cement products after stripping the inner surface is easy to stick on the cement, don't cut Can use the hard material to directly scrape off the inner wall of the cover plate, it will scratch the inner smooth face and leave scar. During the second production, the cement product will be left behind, which will affect the brightness and beauty effect