联系我们

名称:保定市超宇模具模板制造有限公司

微信:15833229779

手机:15833229779

邮箱:3096420649@qq.com

地址:保定市东三环保新路口往南1000米路西

新闻动态
玻璃钢沟盖板安装时操作流程
玻璃钢沟盖板安装时操作流程:
Operating procedure for installation of FRP trench cover plate:
1、玻璃钢沟盖板之间互相连接采用同材质的玻璃钢扣件、连接件。
1. Fiberglass reinforced plastic (FRP) groove cover panels are connected with each other by FRP fasteners and connectors of the same material.
2、如对沟盖板的封闭性有很高的要求,需要相应的使用粘贴剂配合使用。
2. If there is a high requirement for the closure of the ditch cover plate, it is necessary to use the corresponding adhesive in conjunction with the use.
3、注意跨距的尺寸和横撑了支架的数量,要以整体的稳定性为主。 维护工作非常简单,只需简单的定期进行维护即可,一般多为一粪池模具 路缘石模具 唐山通风管道 塑钢电缆挂钩 钢纤维 钢制拍门 植绒机 铜雕佛像些清洗工作。
3. Attention should be paid to the size of span and the number of brackets, which should be based on the overall stability. Maintenance work is very simple, only simple regular maintenance can be done, usually for some cleaning work.
4、水沟两边的支撑面必须平整、坚固:玻璃钢地沟篦子在混凝土地基上至少有50mm宽承托,格栅与混凝土的间隙为3-6mm,作为地沟篦子支撑面必须平整,防止出现格栅受力不均,影响它的使用寿命。
4. The supporting surfaces on both sides of the ditch must be smooth and firm: the FRP grate has at least 50 mm wide support on the concrete foundation, and the gap between the grate and the concrete is 3-6 mm. As the supporting surface of the grate, it must be smooth to prevent uneven stress of the grate and affect its service life

联系方式

  1. 保定市超宇模具模板制造有限公司
  2. 微信:15833229779
  3. 手机:15833229779
  4. 邮箱:3096420649@qq.com
  5. 地址:保定市东三环保新路口往南1000米路西

版权 © 保定市超宇模具模板制造有限公司 网址:mojugg.37ix.com.cn  推荐:盖板模具,沟盖板模具,隔离墩钢模具

济宁空压机 深圳空压机 隔离墩模具